CLONE HARD DRIVE TO SSD USING LINUX SOFTWARE

Now, download the free software that you desire and launch it. But before doing ntfsclone it is necessary to have a duplicate partition table of the HDD on the SSD. Here is a simple process that you can follow to use free SSD cloning software: Step 1: First, connect the target disk to your PC. Then I started looking for NTFS cloning tools – turns out ntfs-3g has a utility called ntfsclone which does exactly that – it copies just the data, not complete blocks. ddrescue was showing estimated time as 17 hours!!! That too when the total data in the HDD is around 200 GB combined – OS (C drive) and Data (D drive). But copying 1 TB from a HDD which reads at max 100 MB/s to a SSD which can write at almost 1500 MB/s is surely an extremely slow job. So the first try was using a block to block copy, using ddrescue. Also you may need to adjust the commands to suit your system to select the correct drive and/or partition when copying partitions. If you are following this post, read it completely before attempting anything.

CLONE HARD DRIVE TO SSD USING LINUX INSTALL

You usually don’t need to install any extra packages, etc. To those who don’t know, SystemRescueCD is a kind of Swiss knife Linux distribution you can use to do all kinds of disk and OS recovery tasks. As someone who has done something of that sort many times, but with Linux based OSes my first thought was if I could do some sort of stuff with a SystemRescueCD running from a USB pen drive – as I wasn’t willing to use any Windows based backup solution since I had no idea how they work, or whether they work at all.

CLONE HARD DRIVE TO SSD USING LINUX WINDOWS 10

Next I shut down and booted into a live USB of Ubuntu 16.06.So, I had an interesting problem at hand – to transfer a completely working Windows 10 installation from a 1 TB HDD to a 1 TB NVME SSD (Samsung 970 EVO Plus). Since presumably you’ve configured your SSD to mirror this setup, the partitions are probably at something like /dev/sdb1, /dev/sdb2, and /dev/sdb3. dev/sda2 refers to my HDD’s second partition, an ext4 partition holding all my data, and /dev/sda3 refers to my swap partition. dev/sda1 refers then to my HDD’s first partition, which in my case happened to be an EFI boot partition. Partitions to your devices then, are generally in order.

So devices are all under /dev/*, and when mounted they’re usually represented in /mnt or /mount or /media. If you’re a newbie, one thing to remember is that *nix represents everything as file descriptors. My HDD was detected at /dev/sda, and my SSD was detected at /dev/sdb. Take note of where your devices are detected. Viewing your current partition table type in Gparted:Ĭreating a new partition table in GParted: Mine was msdos until I erased the SSD and recreated the partition table to match my HDD drive I made it a GPT partition table. When you open GParted, you can see what partition table type your SSD has. With Ubuntu (including live varieties) and because it’s been around since literally forever and is great.

I used GParted mostly because it comes preinstalled Making sure your drive is set up correctly is the first step. This is notable because if your machine is older and you’re using bios, the instructions below may be Older machines use an IBM standard you may have heard of called BIOS.

CLONE HARD DRIVE TO SSD USING LINUX PC

If you don’t know your basic PC stuff, it’s just the layer between your OS and the hardware/firmware. So my machine, being from 2014/2015, uses an Restart ubuntu, run a command so hibernate still works.Modify fstab and some other files-I’d-never-had-figured-out-myself to point to your new drive.Restore grub bootloader using a series of arcane commands.Boot into a live linux install, mount the drives, rsync the necessary files.Table using GParted, add an ext4 partition for my actual files, and a swap partition. In my case, I had to create a GPT partition Partition the SSD so as to mirror the HDD.Erase the SSD, and ensure it is large enough to fit your entire ubuntu installation.

CLONE HARD DRIVE TO SSD USING LINUX HOW TO

How to Copy an Ubuntu Installation from HDD to SDD It might be nice to document it here for future reference. Tonight I moved my installation from HDD to SSD. Then I started playing with some stuff and decided I wanted to decrease disk IOs, so After all, I leave the PC on pretty much 24/7. I’d been meaning to switch my booting to the SSD, but never gotĪround to it. Was cool until I noticed a Slickdeal on SSDs and had to purchase a ~460gb drive. I purchased a computer a while back and installed Ubuntu on the HDD. Shifting an Ubuntu Install from HDD to SSD

Clone hard drive to ssd using linux